Length 102 cm Manufacturer’s suggested retail price 379.00 GBP Shipping weight 10.00 kgManufacturer’s suggested retail price 11.50 GBP Shipping weight 2.00 kgApplication Instructions 1.Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust. 2. Maintain free chlorine residuals routinely in the 1 – 3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment. 3.Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump (s) are turned ‘on’ preferably near the water inlets to aid distribution. 4. Repeat dose/application if necessary to achieve the desired level. 5.After using this product pool water may become temporarily cloudy, so keep the filtration pump running until it clears. 6. After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes before bathing recommences. Manufacturer’s suggested retail price 19.45 GBP Shipping weight 2.00 kgApplication Instructions IMPORTANT: Always wear rubber gloves and eye protection when using this product. 1. Remove cartridge from spa and hose off any loose debris. 2. Fill a clean plastic bucket, large enough to completely immerse the cartridge element, with clean water. 3. Add 1 litre of Spa Cartridge Cleaner for every 20 litres of water in the bucket. 4. Carefully immerse the cartridge element in the solution and allow it to soak overnight or for at least 8 hours. 5. Remove cartridge element from the solution and rinse thoroughly with fresh water. 6. Allow the cartridge element to dry before returning it to service. Manufacturer’s suggested retail price 14.80 GBP Shipping weight 1.50 kgApplication Instructions 1. Check the pH level and if necessary adjust o the desired range 7.2 – 7.6. 2. Use Natural Chemistry Phos Free if phosphate levels are above 100ppb. 3. Ongoing treatment: Use Pool Perfect + Phos Free when sanitiser levels are relatively low and do not exceed the 1-3mg/l recommended range. Do not use after shock treatment as product effectiveness will be reduced. 4. With the filter running, Shake the bottle well and add the required dose directly to a clean and empty skimmer. 5. Keep the circulation system running until Pool Perfect + Phos Free is thoroughly distributed throughout the pool. Shipping weight 2.00 kgApplication Instructions 1. Before applying this product it should be pre-dissolved in a clean plastic container at a maximum rate of 10g per 0.2 gallons (1ltr) of clean cold water. Stir well to ensure the product is fully dissolved. Repeat application to achieve the total dose required – see table below for dose rates. It is recommended that the total treatment is split into three equal applications with a minimum of 1 hour between each. 2. After pre-dissolving add the resulting solution to the spa with the filtration system in operation. 3. Following the application the spa water may become cloudy so keep the filtration pump running continuously until it clears. 4. After treatment check the pH level and if necessary adjust to ideal range of 7.2 – 7.6. Manufacturer’s suggested retail price 9.50 GBP Shipping weight 1.00 kgAPPLICATION INSTRUCTIONS 1.Maintain pH levels within the ideal range 7.2 – 7.6. If the level is not in this range, adjust. 2. Maintain free chlorine levels in the range pools: 1 – 3mg/l (ppm); spas 3 – 5mg/l (ppm). Maintain bromine levels in the range pools/spas: 3 – 5mg/l (ppm). 3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product of 2.2 gallon (10 litres) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump (s) are turned ‘on’ preferably near the water inlets to aid distribution. 4. After shock treatment procedure, allow at least 30 minutes before bathing recommences. Manufacturer’s suggested retail price 59.50 GBP Shipping weight 5.00 kg Liquid Non abrasive AquaSPArkle Spa Surface Cleaner is a highly effective liquid cleaner used to remove oils and greases around the spa waterline. It should also be used to clean the whole spa surface every time the spa is drained and re-filled. Manufacturer’s suggested retail price 14.80 GBP Shipping weight 1.50 kg